LPC236x mbed module — an alternative approach to embedded programming

Introduction
Products
More Info

Introduction

If you're reading this, chances are you've read Tom Cantrell's "Easy (E)mbed" article in the June issue of Circuit Cellar, or you have seen a live mbed module demonstration at the NXP booth at Embedded Systems Conference, Silicon Valley, in early April, or maybe you just came across the mbed module link in the Updates section on the NXP microcontrollers home page.

The mbed module is a new community-based embedded development tool featuring the NXP LPC2368 microcontroller. It allows you to create, compile, and download embedded software for NXP's LPC236x series of MCUs using a browser-based GUI. There is no software to install — everything is online, even the compiler.

40-pin DIP, 0.1" pitch
Programmed via USB
60MHz ARM, 32KB RAM, 512KB flash
Ethernet, USB slave
2xSPI, 2xI2C, 3xUART, 1xCAN
GPIO, 6xPWM, 6xADCs, 1xDAC
C++ libraries and toolchain

Products

Products Supported

Click

for datasheet. Also, see datasheet disclaimer.

indicate product status. Click

for more or less detail.

LPC2361

ARM7TDMI-S microcontroller with 64KB flash, ISP/IAP, 10/100 Ethernet, USB 2.0 device/host/OTG, CAN, 10-bit ADC/DAC

LPC2362

ARM7TDMI-S microcontroller with 128KB flash, ISP/IAP, 10/100 Ethernet, USB 2.0 device/host/OTG, CAN, 10-bit ADC/DAC

LPC2364

Microcontroller with 128KB flash, USB 2.0, 10/100 ethernet, I²S, real-time emulation, dual AHB bus architecture

Datasheet (Apr 9, 2009)

Erratasheet

User Manual

LPC2364FBD100	LQFP-100	Production	SOT407-1	Pb-Free
LPC2364HBD100	LQFP-100	Development	SOT407-1
LPC2364FET100	TFBGA-100	Production	SOT926-1	Pb-Free