Multiplexing/demultiplexing bus switches

• One line to two, four, or eight lines to multiplex or demultiplex the digital signal.
• Options included in these types of configurations are internal level shifting diode (D), Schottky diode clamping (S), and internal termination resistors (R).

Click for datasheet. Also, see datasheet disclaimer.
, , indicate product status. Click or for more or less detail.

CBT3251 1-of-8 FET Multiplexer/Demultiplexer

CBT3253 Dual 1-of-4 FET Multiplexer/Demultiplexer

CBT3253A Dual 1-of-4 FET multiplexer/demultiplexer

CBTD3253 Dual 1-of-4 FET Multiplexer/Demultiplexer with Level Shifting

CBTS3253 Dual 1-of-4 FET Multiplexer/Demultiplexer with Schottky Diode

CBT3257 See CBT3257A replacement

CBT3257A Quad 1-of-2 multiplexer/demultiplexer

CBTD3257 Quad 1-of-2 Multiplexer/Demultiplexer with Level Shifting

CBTS3257 Quad 1-of-2 Multiplexer/Demultiplexer with Schottky Diode

CBTV4010 10-Bit DDR SDRAM Mux/Bus Switch

CBTV4020 20-bit DDR SDRAM 2:1 MUX

CBTU4411 11-bit DDR2 SDRAM mux/bus switch with 12Ω on-resistance

CBT6832 16-Bit 1-of-2 Multiplexer/Demultiplexer with Precharged Outputs and Schottky Undershoot Protection for Live Insertion

CBT6832C 16-Bit 1-of-2 Multiplexer/Demultiplexer with Precharged Outputs and Charge Pump Undershoot Protection for Live Insertion

CBT6832D 16-Bit Controlled Enable Rate 1-of-2 Multiplexer/Demultiplexer with Precharged Outputs and Charge Pump Undershoot Protection for Live Insertion

CBT6832E 16-Bit Controlled Enable Rate 1-of-2 Multiplexer/Demultiplexer with Precharged Outputs and Schottky Undershoot Protection for Live Insertion

CBT16292 12-bit 1-of-2 Multiplexer/Demultiplexer with Internal Pulldown Resistors